The gun has a threaded collar which attaches to flexible braided vinyl tubing. The tubing can be placed inside the pail of product or attached to the pail with a barbed connector. This gun is equipped with an aluminum suction plunger.
CIC Flex Application Spray Gun
Gun body in aluminum
Working pressure: 40-50 psi (max 50 PSI)
Approximate air consumption: 4.0 – 6.0 CFM
Net weight: 14 oz
Adjustable nozzle allows for the application of various coats and patterns.
Instructions for Application of all three products, CIC Boost, CIC Heat Block and CIC Rhinoskin.
Apply via spray gun at wet film thicknesses of 12 or 24 mils (.012” or 0.024”/ approx. .25mm or .5mm) that will dry to 10 or 20 mils (0.010” or 0.020” / approx. 0.25mm or 0.5mm). Surface coverage per gallon is about 50 square feet or just under 10 square meters at 0.020”/20 mils or 0.5mm dry film thickness.
Ceramic Coating can be applied on surfaces up to 350F (177C) while equipment is in service. Key to this method is applying multiple thin coats with a 5-10 mil (0.125-0.25mm) initial coat and layering of additional coats at approximately 0.25mm (10 mils) WFT thickness. You shouldn’t apply over 80 mils DFT (2mm) per day under these conditions to ensure coating can dry thoroughly.